New Products
Productinfo
Product Description
Metal bond blade
Good wear resistance, good shape maintenance and long worklife.
Resin bond blade
Goodself-sharpen, perfect fracture surface quality.
Main features
1.High precision, for grooving and cutting with less procedure
2.Narrow cutting kerfs, for saving valuable material
3.Sharp-edged, high efficiency
4.Good rigidity, high strength and long life span
With thin thickness and high precision, they are mainly used for grooving and cutting with high accuracy and slight cutting depth.
Model specification and the precision for reference(mm)
Saw blade without steel core has high strength and high rigidity. They are generally used for deep cutting and grooving.
Model specification for reference and the precision(mm)
High precision special type cutting wheels
According to customer’s requirement, our institute also can provide with special type cutting wheels (such
as 3A1, 14A1, 1B1, 1F1, 1E1, 1GN1 and etc.)
Order guideline:
When first order, please provide the following parameters so as to select the most suitable cutting wheels.
1. Types: 1A8、1A1、1A1R、3A1、14A1、1B1 and so on
2. Specification:Abrasive, grit, bond type, outer diameter, thickness, inner diameter, work layer width, steel
plate thickness and so on.
3. Usage: The work piece, cutting size, cutting material, grooving or cutting off and so on.
4. The application conditions: The machine, the rotational speed, feed speed, cutting depth; dry or wet cutting
and so on.
5. Cutting requirement: Cutting precision, rip request, superficial integrity and so on.
6. Special requirement: for example: Whether combination use, whether the resin bond cutting wheel needs
the electric conduction, whether there are water slots on the periphery of cutting wheel, number and
specification of the water slots, whether 1A1 type cutting wheel with steel plate has slots for removing
chips on the outer profile and so on.
Attention:
1. Before installing cutting wheels, please carefully inspect and confirm the cutting wheel has no distortion,
crack, rip and so on.
2. When the cutting wheel has a sign of rotation, it must be consistent with rotation direction of the machine.
Otherwise it cannot cut sharply and it is difficult to bring the performance of the cutting wheel into play.
3. Please do not use the cutting wheels that do not conform to requirement.
4. If abnormity appears in the process, it should be immediately stopped.
5. When cutting wheel is not sharp, you must dress the cutting wheel. Otherwise, it will lead to overheat and
excess load which will cause the cutting wheel to damage.
6. When rotating, it is strictly prohibited to control with hand and touch the cutting wheels with body
7. The cutting wheels are only used for grooving and cutting off. Otherwise it is easy to occur abnormity
because of uneven stress.