New Products
Productinfo
Product Description
Signi polishing film SO0.01-66A is special researched and developed for the final polishing of optical fiber connector. There will be no unexpected scratch or defect on the surface of connector and mo matter the optical height or reflect weaken data can reach to the international standard.
Signi polishing film is formed by the drying and solid reaction after the mixing of Sio2 micro powder and high efficiency adherent. Transparent or semitransparent polishing film can be formed after the evenly distribution because the fineness and size of polishing granularity is smaller than the wavelength of visible light.
Only the clean water is needed as the polishing medium when use SO0.01-66A. During the polishing process, the nanometer coating will release polishing granularities gradually which will attend the polishing function to make the surface of optical fiber superb smooth. The polishing film can be recycling used. However, the reusing times are different according to the types of grinding machines, polishing condition and polishing quality.
Specification and types:
items
|
standard
|
note
|
appearance
|
Total transparent or semitransparent
|
|
mineral
|
Sio2
|
|
granularity
|
0.008-0.015micro
|
Laser granularity instrumentNPA-150
|
Thickness of film
|
79±7micro
|
Optical fiber thickness instrument
|
Specification of film
|
Round film:Φ110mm\Φ127mm(5inch)\Φ203mm(8inch)
Quadrate film:114mm*114mm\152mm*152mm(6inch)\203mm*206mm(8inch)
Ribbon film:203mm(6inch)--width
|
Film or roll products can be customized according customers requirements
|
Usage method:
1. make sure that there is no scratch or defect on the surface of optical fiber after D1 fine polishing
2. Clean the polishing jigs and rubber mat totally and ensure the surface of rubber mat is perfect and without any objects.
3. Spray certain water on the surface of rubber mat and stick the polishing film onto it as soon as the surface is dry
4 spray certain water on the surface of the polishing film and cleanse it with paper towel to get rid of the air under the polishing film
5. blow the polishing film surface with compressed air to get rid of the dust and other objects
6. drop certain water again on the surface of polishing film
7. put the connector jig carefully and make them touch evenly, after that increase certain press, set the polishing time and start the grinding machine to begin polishing
8.after the stop of grinding machine, get the jigs and polishing film carefully and make them dry for the repeated usage
We are China Sio2 manufacturer offer best Sio2 OEM, ODM,service.